FANDOM


2014-02-20 09.54.58

Bevel gears allow for the redirection of shaft power around 90-degree angles. They are most useful when paired with machines that accept power from the bottom, since nearly all engines output power from the sides.

Rotarycraft Handbook DescriptionEdit

"Bevel gears are used to change the direction of power transmission without changing the torque or speed. Unlike their inline cousins, they do not need lubricant, and will operate continuously and losslessly."

InterfaceEdit

When right clicking on the bevel gear, one is presented with a color map, where each color corresponds to a side of bevel gear. When right clicking on the bevel gear with a screw driver, colors matching those of the GUI color map are shown (+ standard input/output green/red). This allows for easy orienting of bevel gears, without guessing.

2014-02-20 09.55.38
2014-02-20 09.56.35
Color Direction
Cyan Bottom
Blue Top
Yellow North
Black South
Orange West
Purple East

Tips & TricksEdit

  • Bevel gears can be very useful to redirect power from one power source (such as an Industrial Coil) to multiple machines if they don't need to run at the same time.  This is useful early on to save time. An example setup may have an Industrial Coil input, a Grinder on the left, a Coil Winder on the right, and an Extractor on top.
  • If you lack diamond shafts to do a high speed/high torque transfer over small distance, a series of steel bevel gears can be used. Although a headache to place, they will withstand speeds/torques that steel shafts won't.

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.